IIDB Steering Tiller is supported by any flight simulators that have the ability to assign a separate axis to control Steering Tiller including MSFS2020 / MSFS2024 / X-Plane and more.

1. Turn Off your Device (Unplug USB from computer)
2. Hold “PEDAL DISC” button and Turn On your Device (Plug back USB to computer)
3. Keep holding “PEDAL DISC” button at least for 6 seconds then release
4. Backlight should be blinking
5. Turn the tiller all the way in one direction (to the left), then return it to the center, then turn it all the way in the other direction (to the right)
6. Push “PEDAL DISC” button to finish calibration
7. Congratulations, your device has been successfully recalibrated!

Nose Wheel and Tiller Setup and Operation available for FlyByWire A32NX/A380X, Fenix A32X and FSLabs A321ceo.
Please follow instructions bellow:

1. FlyByWire Airbus A32NX / A380X
   • https://docs.flybywiresim.com/aircraft/a32nx/feature-guides/nw-tiller/?h=tiller#what-is-the-tiller
     
     
2. Fenix Airbus A32X Series Instruction:
   1. Install registered FSUIPC v7
   2. Open FSUIPC panel in Flight Simulator
   3. Click ‘Assignments” in upper menu > ‘Buttons & Switches …’
   4. Push Pedal Disc Button on the Tiller
   5. Check ‘Select for Preset’
   6. Click ‘Find Preset …’ on ‘Control sent when button pressed’
   7. Then ‘MobiFlight > FenixSim > A320 > Gear > FNX320 Misc Tiller Pedal Disconnect Captain(or FO) Press > Click ‘Select’
   8. Click ‘Find Preset …’ on ‘Control sent when button released’
   9. Then ‘MobiFlight > FenixSim > A320 > Gear > FNX320 Misc Tiller Pedal Disconnect Captain(or FO) Press > Click ‘Select’
   10. Click ‘Ok’
       
       
       
       
3. FSLabs Airbus A321ceo Instruction:
   1. Open MSFS Control Settings
   2. Assign ‘Toggle Water Rudder’ to ‘PEDAL DISC’ button